Shortname for a TwentyFiveGigE on the show interface status (C9300)

[fvillegasv]

Hi guys,

Just asking if anyone knows how a TwentyFiveGigE interface will appear on the  output  of 'show interface status' on a Cisco C9300??

I already have identified the following info:

FiveGigabitEthernet ---- Fi
FortyGigabitEthernet ---- Fo
GigabitEthernet ---- Gi
TenGigabitEthernet ---- Te
TwentyFiveGigE ---- Twe???
TwoGigabitEthernet ---- Tw

Kind regards.

[Georg Pauwen · Accepted solution]

Hello,

I think you already got it right:

twe

Below is an excerpt from the Interface and Hardware Components Configuration Guide:

To configure a physical interface (port), specify the interface type, stack member number (only stacking-capable switches), module number, and device port number, and enter interface configuration mode.

Type—Gigabit Ethernet (GigabitEthernet or gi) for 10/100/1000 Mb/s Ethernet ports, 2.5-Gigabit Ethernet (TwoGigabitEthernet or tw) for 2.5 Gb/s, 5-Gigabit Ethernet (FiveGigabitEthernet or fi) for 5 Gb/s, 10-Gigabit Ethernet (TenGigabitEthernet or te) for 10 Gb/s, 25-Gigabit Ethernet (TwentyFiveGigE or twe) for 25 Gb/s, small form-factor pluggable (SFP) module Gigabit Ethernet and 10-Gigabit Ethernet interfaces and and quad small-form-factor pluggable (QSFP) module 40-Gigabit Ethernet (FortyGigabitEthernet or fo) for 40 Gb/s.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-8/configuration_guide/int_and_hw/b_168_int_and_hw_9300_cg/b_168_int_and_hw_9300_cg_chapter_00.html

[Deepak Kumar]

Hi,

TwentyFiveGigE ---- Twe???

Yes, you are correct.

Regards,

Deepak Kumar