10-12-2017 12:52 PM - edited 03-08-2019 12:20 PM
Hi All,
Can the ACL I use in a PBR statement have multiple lines, and can it call specific source AND destinations? For example:
access-list 107 permit ip 192.168.107.0 0.0.0.255 192.168.0.0 0.0.255.255
access-list 107 permit ip 192.168.107.0 0.0.0.255 172.16.0.0 0.0.15.255
access-list 107 permit ip 192.168.107.0 0.0.0.255 10.0.0.0 0.0.0.255
access-list 197 permit ip 192.168.107.0 0.0.0.255 any
route-map INTERNET-NO-RFC1918 permit 10
match ip address 107
set ip next-hop address 192.168.107.1
route-map INTERNET-NO-RFC1918 permit 20
match ip address 197
set ip next-hop address 17.231.45.153
route-map INTERNET-NO-RFC1918 permit 30
int vl21
ip policy route-map INTERNET-NO-RFC1918
Solved! Go to Solution.
10-12-2017 05:31 PM
10-12-2017 05:31 PM
10-13-2017 04:18 AM
Thank you very much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide