ACL list on L3 Switch

[interface]

I have L3 switch with 6 vlan. ( 1-2-3-4-5-6)

1 can only have internet connetc.

2-3-4 vlans can go everywhere.

How can i write access list for this ? can you give an example?

and another question is;

how can i config redistribution static route in bgp ?

[balaji.bandi]

Look at the example ACL will help you blocking from VLAN 1 to other VLANs

https://www.cisco.com/c/en/us/support/docs/security/ios-firewall/23602-confaccesslists.html

how can i config redistribution static route in bgp ?

In general we use below :

router bgp XXX 
redistribute static

[interface]

First of all thanks for answers. 

I found to block vlan 1 against pther though. What command do i need to enter just to go to the internet ? Shouldn't I ACL for other vlans (they have access everywhere)? And finally the command for redistribute is that all? For example, router A has static 10.0.0.1 on one leg and bgp 10.0.0.1 on the other leg. (if there is anything else you can make it up) how can i write it ?

@balaji.bandi 

[paul driver]

Hello

for the vlan restriction a routed access-list can be applied.

example:
access-list 100 deny ip any 3.3.3.0 0.0.0.255
access-list 100 deny ip any 4.4.4.0 0.0.0.255
access-list 100 deny ip any 5.5.5.50 0.0.0.255
access-list 100 deny ip any 6.6.6.0 0.0.0.255
access-list 100 permit ip any any

in vlan 2
access-group 100 IN