After enabling port-security host is not reachable

[Anas Hijjawi]

Hi, after we enable port security on the switch the host will not be reachable, please note that we hve some ports on the same switch configured for 802.1x authentication, below is the configuration for thhe port:

interface fa 0/20

switchport mode access

switchport access vlan 20

swicthport port-security

switchport port-security maximum 2

switchport port-security maximum 1 vlan access

switchport port-security maximum 1 vlan voice

switchport port-security mac-adress sticky

• 1

[paul driver]

hello

Possiblely to restrictive for that....can you post

sh port-security int fa0/20

res

Paul

[Venkatesh Attuluri]

check for protect security violation mode on interface