Hi
I don' have any idea what the following means
*Apr 27 14:52:21.991 GMT: SP: PREDNLD: LC doesn't meet resource requirement for pre-download, not reserving memory for slot 2
I haven't find any useful information on google
any guy help me?
*Apr 27 06:49:45.775: RP: Currently running ROMMON from S (Gold) region
*Apr 27 06:49:54.503: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
000003: *Apr 27 14:49:58.363 GMT: %SYS-6-CLOCKUPDATE: System clock has been updated from 06:49:58 UTC Wed Apr 27 2011 to 14:49:58 GMT Wed Apr 27 2011, configured from console by console.
000004: *Apr 27 14:49:59.395 GMT: %SYS-5-CONFIG_I: Configured from memory by console
000005: *Apr 27 14:50:01.075 GMT: %SYS-5-RESTART: System restarted --
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-IPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sun 19-Dec-10 13:17 by prod_rel_team
000006: *Apr 27 06:49:15.867: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Firmware compiled 02-Aug-10 16:16 by integ Build [100]
000007: *Apr 27 06:49:53.839: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Apr 27 06:49:54.047: SP: SP: Currently running ROMMON from S (Gold) region
000008: *Apr 27 06:49:56.811: %C7600_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default factory setting for config register is 0x2102.It is advisable to retain 1 in 0x2102 as it prevents returning to ROMMON when break is issued.
000009: *Apr 27 06:50:00.881: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, c7600rsp72043_sp Software (c7600rsp72043_sp-IPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sun 19-Dec-10 13:23 by prod_rel_team
000010: *Apr 27 06:50:00.885: %SYS-SP-6-BOOTTIME: Time taken to reboot after reload = 119 seconds
000011: *Apr 27 06:50:03.026 UTC: %OIR-SP-6-INSPS: Power supply inserted in slot 1
000012: *Apr 27 06:50:03.026 UTC: %C7600_PWR-SP-4-PSOK: power supply 1 turned on.
000013: *Apr 27 06:50:03.086 UTC: %OIR-SP-6-INSPS: Power supply inserted in slot 2
000014: *Apr 27 06:50:03.086 UTC: %C7600_PWR-SP-4-PSOK: power supply 2 turned on.
000015: *Apr 27 06:50:03.090 UTC: %C7600_PWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
000016: *Apr 27 14:50:09.430 GMT: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
000017: *Apr 27 14:50:09.514 GMT: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
000018: *Apr 27 14:50:10.667 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
000019: *Apr 27 14:50:14.831 GMT: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics
000020: *Apr 27 14:50:15.215 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online
000021: *Apr 27 14:50:16.303 GMT: %PFREDUN-SP-6-ACTIVE: Standby initializing for SSO mode
000022: *Apr 27 14:50:46.231 GMT: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 6.
000023: *Apr 27 14:50:46.315 GMT: %FABRIC-SP-5-FABRIC_MODULE_BACKUP: The Switch Fabric Module in slot 6 became standby
000024: *Apr 27 14:50:47.063 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 6: Running Minimal Diagnostics...
000025: *Apr 27 14:50:48.311 GMT: %DIAG-SP-6-DIAG_OK: Module 6: Passed Online Diagnostics
000026: *Apr 27 14:50:49.103 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are now online
*Apr 27 06:50:58.527: CFC2: Currently running ROMMON from S (Gold) region
*Nov 30 00:00:02.659: CFC1: Currently running ROMMON from S (Gold) region
000027: *Apr 27 14:51:00.887 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...
000028: *Apr 27 14:51:00.923 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...
000029: *Apr 27 14:51:04.527 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics...
000030: *Apr 27 14:51:04.579 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimal Diagnostics...
000031: *Apr 27 14:51:08.331 GMT: %DIAG-SP-6-RUN_MINIMUM: Module 9: Running Minimal Diagnostics...
000032: *Apr 27 14:51:10.839 GMT: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
*Apr 27 14:51:11.067 GMT: SP: PREDNLD: LC doesn't meet resource requirement for pre-download, not reserving memory for slot 1
000033: *Apr 27 14:51:13.395 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online
000034: *Apr 27 06:50:07.803: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
000035: *Apr 27 06:50:19.931: %C7600_PLATFORM-SP-STDBY-4-CONFREG_BREAK_ENABLED: The default factory setting for config register is 0x2102.It is advisable to retain 1 in 0x2102 as it prevents returning to ROMMON when break is issued.
000036: *Apr 27 06:50:40.171: %SPANTREE-SP-STDBY-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Apr 27 06:50:40.387: SP-STDBY: SP: Currently running ROMMON from S (Gold) region
000037: *Apr 27 06:50:44.715: %C7600_PLATFORM-SP-STDBY-4-CONFREG_BREAK_ENABLED: The default factory setting for config register is 0x2102.It is advisable to retain 1 in 0x2102 as it prevents returning to ROMMON when break is issued.
000038: *Apr 27 06:50:45.047: %DIAG-SP-STDBY-6-RUN_MINIMUM: Module 6: Running Minimal Diagnostics...
000039: *Apr 27 06:50:45.959: %DIAG-SP-STDBY-6-DIAG_OK: Module 6: Passed Online Diagnostics
000040: *Apr 27 06:51:35.879: %SYS-SP-STDBY-5-RESTART: System restarted --
Cisco IOS Software, c7600rsp72043_sp Software (c7600rsp72043_sp-IPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sun 19-Dec-10 13:23 by prod_rel_team
000041: *Apr 27 14:51:49.075 GMT: %HSRP-5-STATECHANGE: Vlan601 Grp 61 state Standby -> Active
000042: *Apr 27 14:51:52.823 GMT: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded
000043: *Apr 27 14:51:52.327 GMT: %PFREDUN-SP-STDBY-6-STANDBY: Ready for SSO mode
000044: *Apr 27 14:51:53.699 GMT: %RF-SP-5-RF_TERMINAL_STATE: Terminal state reached for (SSO)
000045: *Apr 27 14:52:12.539 GMT: %DIAG-SP-6-DIAG_OK: Module 9: Passed Online Diagnostics
000046: *Apr 27 14:52:21.579 GMT: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics
*Apr 27 14:52:21.991 GMT: SP: PREDNLD: LC doesn't meet resource requirement for pre-download, not reserving memory for slot 2
000047: *Apr 27 14:52:25.511 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online
000048: *Apr 27 14:52:32.127 GMT: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics
*Apr 27 14:52:32.535 GMT: SP: PREDNLD: LC doesn't meet resource requirement for pre-download, not reserving memory for slot 3
000049: *Apr 27 14:52:32.931 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 9, interfaces are now online
000050: *Apr 27 14:52:39.627 GMT: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
*Apr 27 14:52:40.083 GMT: SP: PREDNLD: LC doesn't meet resource requirement for pre-download, not reserving memory for slot 4
000051: *Apr 27 14:52:44.291 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are now online
000052: *Apr 27 14:52:51.559 GMT: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now online
sw6#
