06-28-2021 06:12 PM - edited 06-28-2021 09:34 PM
Hi All,
I am holding an cisco 1832 AP which is not joining on WLC. Can someone help me to know the reason.
06-28-2021 06:23 PM
Post the complete output to the following commands:
06-28-2021 06:45 PM - edited 06-28-2021 08:43 PM
NA
06-28-2021 06:56 PM
06-28-2021 07:06 PM - edited 06-28-2021 09:36 PM
Hi Leo ,
Sry There was some typo error its Australia
06-28-2021 07:23 PM - edited 06-28-2021 07:24 PM
@Robo123 wrote:
Configured Country............................... AU - Australia
and AP in right Regulatory Domain -N
No, it is not.
For 1800 (and newer), the Regulatory Domain for Australia is "-Z".
06-28-2021 07:25 PM - edited 06-28-2021 09:37 PM
But i have another same model working AP under Regulatory Domain -N and which is already joined in WLC.
Let me know what's your input on this
06-28-2021 08:23 PM
Is this an Australian security or ADF network?
06-28-2021 08:32 PM - edited 06-28-2021 08:40 PM
Australian security or ADF network?----What you mean by this.
06-28-2021 08:34 PM
@Robo123 wrote:
Australian security
Y'know you've just contravened DSD regulations, right?
You're not suppose to post TSPV network in public-facing forums.
06-28-2021 08:41 PM
Sry I didn't get your question. and for more info this is our LAB set up where we are facing issue.
06-28-2021 08:45 PM
@Robo123 wrote:
Sry I didn't get your question. and for more info this is our LAB set up where we are facing issue.
NOTE: If this is non-prod/lab then do not "over edit" the output. Take away the name and the IP addresses. Leave the rest.
Post the complete output to the following commands:
06-28-2021 08:58 PM - edited 06-28-2021 09:33 PM
PFA
06-28-2021 09:25 PM
Disable Australia as a country and enable Fiji.
Reboot the AP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide