is there a step by step guide on how to manage AP541n with a 2504 controller?
I have done the initial config on the 2504 but somehow the AP does not join and i can not find what would be a correct setting for the AP. How does that work anyway. In all documentation i found the AP somehow finds the controller, but in my case it does not.
I recently retired a number of 541's because they do not support an enterprise wireless configuration like you are attempting. Between themselves they can form a cluster but they are not able to join a with a controller.
You will need new access points to use with your WLC.
Does anyone have or know of any Powershell scripts to collect information from Cisco switches (Nexus, layer 2) and output to csv or Excel? Need to document a number of Cisco switches with port, vlan, routes, ACL information. Thanks
Community Live- Basic Wireshark for Networking Students
(Live event - formerly known as Webcast- Tuesday 14 April, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Tuesday 14th, April 2020 at 10hrs PDT
Cisco IOS-XE 17.2.1 – Catalyst Switching Updates
Cisco has announced the availability of the latest IOS-XE release - IOS-XE Amsterdam 17.2. This release IOS-XE 17.2 is the next Standard Maintenance Release after 17.1 which also has a sustaining lifetime o...
In this article, we are going to talk about Cisco Umbrella Initial Setup.- The continuity of IT is the basis of today’s business environment. Almost every single decision made by business is either based on an IT data or done using the IT platform. And so...