cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
0
Helpful
3
Replies

Application launch issue while connecting via Cisco IP Phone

Adnan Khan
Level 4
Level 4

Launching an application and getting below error while connected via IP phone. But when connect PC directly application work fine. What could be the issue? phone is registered

 

"Warning

 

You are unable to run this program because the local IP Address 169.254.x.x

Please contact your network administrator"

 

Switch port configuration

 

switchport access vlan x
switchport mode access

switchport voice vlan y
power inline auto max 15400
spanning-tree portfast

 

 

3 Replies 3

marce1000
VIP
VIP

 

 - Well the PC seems to be using a link-local address , indicating it does not get DHCP or and does not have  a working connection to the Intranet network.

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Actually PC had IP but when launch application it gives 169.254.x.x IP error. issue is resolve by re installing NIC driver. kind of weird issue

Hello

Do you have dhcp active for voice vlan?, if you are not sure then remove the cisco phone and change the access vlan to the voice vlan and connect a pc.

int x/x

no switchport voice vlan y
switchport access vlan y

 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card