cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
33651
Views
78
Helpful
120
Replies

Ask the Expert: QoS on Catalyst Switches.

ciscomoderator
Community Manager
Community Manager

With Shashank Singh  and Read the bioRead the bio

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn from Cisco experts Shashank Singh and Sweta Morga about implementation and working and troubleshooting QoS on Cisco Catalyst 2960, 3650, 3750, 4500 and 6500 switches.

Shashank Singh  graduated in 2009 with a bachelor's degree in Computer Science and Engineering from VIT University, Vellore India. Prior to joining Cisco he worked at General Electric as a software engineer. Later on he joined the Cisco Technical Assistance Center as an engineer in October of 2009. He has been working on LAN Switching technologies in TAC since then. Shashank also holds a CCNP certificate. QoS on Catalyst switches is one of the areas of his interest.

Sweta Mogra is a Computer Science & Engineering graduate from VIT University, India. She has worked as a consultant with Tata Consultancy Services before joining Cisco's Technical Assistance Center (TAC) in 2011. She is currently working on LAN Switching technologies and QoS as one of her areas of expertise.

Remember to use the rating system to let Shashank and Sweta know if you have received an adequate response. 

Shashank and Sweta might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Network Infastructure sub-communityLan Switching forum shortly after the event. This event lasts through June 1, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

120 Replies 120

DavidRed
Level 1
Level 1

Hi everyone! Do you see any future developments in bringing a more unified approach to deploying QoS on Catalyst Switches? I understand the hardware used between models in very different, which makes deploying QoS on a 6500 very different to deploying QoS on a 3750. Are there plans to perhaps have the priority queue numbered as queue number X on all Catalyst platforms?

Thanks,

Review Cisco Networking for a $25 gift card