cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
825
Views
0
Helpful
0
Replies

ASR 1001 License

Soleymani
Level 1
Level 1

Hello All

My friend have a 3 ASR1001 Route: R1,R2 & R3

on Router R1 and R3 we can see this result

Router#sh license
License Store: Primary License Storage
StoreIndex:  0  Feature: firewall                          Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Primary License Storage
StoreIndex:  1  Feature: adventerprise                     Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Primary License Storage
StoreIndex:  2  Feature: ipsec                             Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium

Router#sh license feature
Feature name        Enforcement   Evaluation  Clear Allowed  Enabled
adventerprise       yes           no          yes            yes   
advipservices       yes           no          yes            no    
ipbase              no            no          yes            no    
throughput          yes           no          yes            no    
internal_service    yes           no          yes            no    
sw_redundancy       yes           no          yes            no    
ipsec               yes           no          yes            no    
firewall            yes           no          yes            no    
fpi                 yes           no          yes            no    
fwnat_red           yes           no          yes            no    
lawful_intr         yes           no          yes            no    
broadband           yes           no          yes            no    
broadband_4k        yes           no          yes            no    
broadband_16k       yes           no          yes            no    
broadband_32k       yes           no          yes            no    
cube_250            yes           no          yes            no    
cube_250_red        yes           no          yes            no    
cube_2k             yes           no          yes            no    
cube_4k             yes           no          yes            no    
cube_16k            yes           no          yes            no    
cube_32k            yes           no          yes            no    
cube_lab            yes           no          yes            no    
cube_lab_red        yes           no          yes            no    
cube_video_b2btp    yes           no          yes            no    
cube_video_b2btp_redyes           no          yes            no    
cube_ent_100        yes           no          yes            no    
cube_ent_100_red    yes           no          yes            no    
avc                 yes           no          yes            no

 

But on R2 not see anything !

Router#sh license

Router#sh license all

Router#sh license detail
%Error - License feature not found

Router#sh license feature
Feature name        Enforcement   Evaluation  Clear Allowed  Enabled
adventerprise       yes           no          yes            no    
advipservices       yes           no          yes            no    
ipbase              no            no          yes            no    
throughput          yes           no          yes            no

...

 

He give "ipbase" license for R1 & R2 "PID and Serial Number" and now he see R2 don't have license ! (maybe it's clear without any backup)

1- how can find a way to restore pre installed "adventerprise" ?

or

2- how can ignore applied request for R2 and give a new one for R3 ?

Regards

Armen

 

0 Replies 0
Review Cisco Networking for a $25 gift card