ASR 1002 and Port-Channeling

[jonesl1]

I have a requirement to create a 2gig connection to an ASR from a Catalyst 3750x.   I have the port-channel set up on the

3750, but i'm unsure of how to go about making the port-channel on the ASR.   It appears as though VLAN load balancing is

the only option here.   I'm not sure how to go about this....and does this do the same thing?   I'm, in basic terms, just trying to

create a 2Gb connection from my 3750 to my ASR.   I'm just not sure how to go about it.   Can someone please help.

Thanks in advance!!

[Reza Sharifi]

Hi,

What version of Cisco IOS XE are you using?

You need Cisco IOS XE Release 2.4 or later to do LACP

Here is the doc for more info:

http://www.cisco.com/en/US/docs/ios/ios_xe/cether/configuration/guide/ce_lnkbndl_xe.html

HTH

[jonesl1]

How can I tell which version it is.   I am showing a 12.2(33)XNC which doesn't reflect the same type of number

your showing above.   Do I need to look in a different spot to find this?  I apologize up front for my ignorance on this issue.

[Reza Sharifi]

Try "show ver" on your ASR.  This should show you what version of the IOS XE you are running

HTH

[jonesl1]

Looks like I can't find it.   This is what I show when doing a sho ver:

Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version

12.2(33)XNC, RELEASE SOFTWARE (fc2)

Flash shows:

   12  -rw-   236929284  May 23 2009 11:43:55 -05:00  asr1000rp1-adventerprisek9.02.03.00.122-33.XNC.bin

Does the 2.3.0 on the line of flash indicate that it's 2.3.0?? 

Thanks again Reza for your assistance.   I do appreciate it.