Upgraded ASR1002 with asr1000-rommon-155-3r.S1.pkg and asr1000rp1-adventerprisek9.03.16.01a.S.155-3.S1a-ext.bin.
Performed a show rom-monitor 0 to verify that asr1000-rommon-155-3r.S1.pkg was successful.
got "System Bootstrap, Version 15.5(3r)S1, RELEASE SOFTWARE"
Performed a sh ver to verify that asr1000rp1-adventerprisek9.03.16.01a.S.155-3.S1a-ext.bin was successful.
got "Cisco IOS Software, ASR1000 Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.4(3)S1, RELEASE SOFTWARE (fc3)"
I have both files above in my running-config (copied to startup-config) within the boot section --> bootflash:/
However, when I performed a reload, the ASR1002 got stuck in ROMMON mode.
When I tried to perform a "reset" in ROMMON mode, see messages that failed SHA-1 hash match and that the ASR1002 is running from "asr-1000-rommon.153-3r.S.pkg".
This was the previous ROM firmware that is not resident on the platform; had deleted it upon successful messages above.
Question: Is there an incompatibility between asr1000-rommon-155-3r.S1.pkg and asr1000rp1-adventerprisek9.03.16.01a.S.155-3.S1a-ext.bin.?