cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
559
Views
0
Helpful
1
Replies

ASR1002-X : QINQ ?

therebel22
Level 1
Level 1

Hello,

 

we hav ASR1002-X and we want to do QINQ  but we don't have second-dot1q command  ? Is there a problem (show lic is below)

 

Thanks a lot for reply !

 

conf term

interface GigabitEthernet0/0/0.5

ASR(config-subif)#encapsulation dot1Q 59 ?
  native  Make this as native vlan
  <cr>

 

 

 "show lic"

 

sh license
Index 1 Feature: adventerprise
        Period left: 8  weeks 3  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA accepted
        License Count: Non-Counted
        License Priority: Low
Index 2 Feature: advipservices
        Period left: Life time
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
Index 3 Feature: ipbase
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 4 Feature: avc
Index 5 Feature: broadband
        Period left: Life time
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
Index 6 Feature: broadband_4k
Index 7 Feature: cube_250
Index 8 Feature: cube_250_red
Index 9 Feature: cube_ent_100
Index 10 Feature: cube_ent_100_red
Index 11 Feature: cube_lab
Index 12 Feature: cube_video_b2btp
Index 13 Feature: cube_video_b2btp_red
Index 14 Feature: firewall
Index 15 Feature: fpi
Index 16 Feature: fwnat_red
        Period left: 8  weeks 4  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 17 Feature: gtp_addon_aic
Index 18 Feature: internal_service
Index 19 Feature: ipsec
        Period left: 8  weeks 4  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 20 Feature: lawful_intr
        Period left: 8  weeks 4  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 21 Feature: lisp
Index 22 Feature: nat64_stateful_2m
Index 23 Feature: otv
Index 24 Feature: sgt_fw
Index 25 Feature: sw_redundancy
        Period left: 8  weeks 4  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 26 Feature: throughput_10g
        Period left: Life time
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
Index 27 Feature: throughput_10g_to_20g
Index 28 Feature: throughput_10g_to_36g
Index 29 Feature: throughput_20g
        Period left: 8  weeks 4  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 30 Feature: throughput_20g_to_36g
Index 31 Feature: throughput_36g
        Period left: 8  weeks 4  days
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 32 Feature: vpls

 

 

1 Reply 1

therebel22
Level 1
Level 1

Is anyone has any idea ?

Is it licence problem or interface problem ?

Thanks a lot.

Review Cisco Networking for a $25 gift card