ASR9K Vlan service configuration

[isbou1986]

Hello,

Need help for below please.

Below is the kind of topology I have, and I want to connect behind L2VPN network. with the configuration I did, I can see traffic in on the physical interface(0/0/0/1) connected to the L2VPN network but no traffic out and no traffic on both sub-interfaces also. Please can anyone help me with right configuration may I perform on my Cisco ASR9K router to make service working.

see configuration on the ASR interfaces:

"interface TenGigE0/0/2/1.200 l2transport
encapsulation dot1q 200

interface GigabitEthernet0/0/0/1.200 l2transport
encapsulation dot1q 200

Thanks in advance for your kindly support.

Regards.

[MHM Cisco World]

ASR local connect need this, 

[isbou1986]

Hello,

Thanks for your reply, so you mean the configuration I did on my subinterfaces are OK but I have to add attached configuration ou sent?