11-20-2021 06:07 AM - edited 11-20-2021 06:08 AM
Hello,
Need help for below please.
Below is the kind of topology I have, and I want to connect behind L2VPN network. with the configuration I did, I can see traffic in on the physical interface(0/0/0/1) connected to the L2VPN network but no traffic out and no traffic on both sub-interfaces also. Please can anyone help me with right configuration may I perform on my Cisco ASR9K router to make service working.
see configuration on the ASR interfaces:
"interface TenGigE0/0/2/1.200 l2transport
encapsulation dot1q 200
interface GigabitEthernet0/0/0/1.200 l2transport
encapsulation dot1q 200
Thanks in advance for your kindly support.
Regards.
11-20-2021 06:21 AM
ASR local connect need this,
11-20-2021 08:35 AM
Hello,
Thanks for your reply, so you mean the configuration I did on my subinterfaces are OK but I have to add attached configuration ou sent?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: