cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
22708
Views
0
Helpful
17
Replies

Bad mask /24 for address 10.0.0.1

saidfrh18
Level 1
Level 1

Hi,

I have a Cisco 2520 router with flash:igs-j-l.111-5. Why can' a 10.0.0.1 address be fiven a /24?

SanJose1(config-if)#ip address 10.0.0.1 255.255.255.0

Bad mask /24 for address 10.0.0.1

Thanks.

17 Replies 17

Peter,

I have been using Solarwinds tftp server.  Tftpd32 has been downloaded, however the router is not looking for the assigned directory from tftp32 for the image.  The router is looking for tftp-root folder.  I do not have access to the images you suggested.

Said

10.0.0.0.1
Level 1
Level 1

You can try the Cisco device configuration settings for the 10.0.0.1 ip address. However, we recommend that you get advice from a network specialist.

For further assistance and support, please check out our 10.0.0.0.1 - 10.0.0.1 router IP Details support page.

techbusk
Level 1
Level 1

I was searching for 10.0.0.1 logging issue but I find a proper solution here.  Thank you for sharing your thoughts. I really appreciate your efforts and I will be waiting for your next write. thank you once again.10.0.0.0.1

jennlyc dawn
Review Cisco Networking for a $25 gift card