07-16-2013 07:37 PM - edited 03-07-2019 02:26 PM
Hi,
I have got an cisco router with 3 interface. Interface FA 0/0 is an outside interface and interface fa0/1 and fa0/2 are inside interface.
Int Fa0/0
Desc Connected to Outside, the inside internet traffic passes through this router
ip address 192.168.200.1 255.255.255.0
Int Fa0/1
Desc Connected to Remote
Ip Address 10.10.0.1 255.255.0.0
Int Fa0/2
Desc Connected to HO
Ip Address 192.168.100.1 255.255.255.0
Now I want to apply bandwidth restriction as follows:
1. Full Bandwidth for Private Address from all sources.
2. Full Bandwidth for 173.194.38.150, 209.191.122.42 from all sources
3. 1 Mbps limitation for 202.51.65.57 through 10.10.10.0/24, 10.10.20.0/24 and 10.10.30.0/24
4. 2 Mbps limitation for 202.51.69.57 through 10.10.101.0/24, 10.10.201.0/24 and 10.10.205.0/24
5. Full Bandwidth from 192.168.100.0/24 to any
6. 0 Mbps internet for rest.
Is this possible in cisco router, please guide me.
Thanks in advance
- Mero
10-14-2013 08:21 AM
Pls help
Sent from Cisco Technical Support iPhone App
10-14-2013 08:42 AM
hi,
just go to each int and try out the bandwith command. it might help.. what is the model of router .
example:
bandwidth 128 (this is in kilobits)http://certcollection.org/forum/topic/55536-limit-bandwidth-on-a-cisco-catalyst-switch-port/
10-14-2013 08:51 AM
Dear Anirudh,
Cisco 1841, bandwidth mgmt to each interface won't work because it have to be unlimited for private ip and also unlimited for some public ip
Mero
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide