Bellow 1000 vlan not showing in nexus 5k switch

[aguntukkk]

Dear Concern,

In my nexus 5k switch  i am trying to adding example vlan 10. cli command is taking but its not showing if i give show configuration.
Please help . 

[MHM Cisco World]

VLAN store in two different location 
try use 
show vlan breif <<- to check all VLAN in N5K 

MHM

[Mark Elsen]

  - Check logs on the nexus when trying to add that vlan,

  M.

[amikat]

Hi,

Can you please check your VTP Operating Mode ("show vtp status"). If it is configured as a VTP client, you cannot create VLANs on the switch in the range of 1 to 1005.

Best Regards,

Antonin

[aguntukkk]

X5K-CoLoAsia# sh vtp status
VTP Status Information
----------------------
VTP Version : 3 (capable)
Configuration Revision : 14
Maximum VLANs supported locally : 1005
Number of existing VLANs : 45
VTP Operating Mode : Server
VTP Domain Name : <VTP domain not acquired/configured yet>
VTP Pruning Mode : Disabled (Operationally Disabled)
VTP Traps Generation : Disabled
MD5 Digest : 0x9D 0x30 0xB9 0x2D 0x42 0xCE 0xB9 0x79
0x7E 0x79 0xAE 0x4C 0x28 0xBC 0x71 0x71
VTP V2 Mode : Disabled

Configuration last modified by 172.16.7.5 at 1-6-25 11:34:33

Local updater ID is 172.16.7.5 on interface Vlan1090 (lowest VLAN interface found)
VTP version running : 1

[aguntukkk · Accepted solution]

Yup its VTP issues. VTP operating mode was server when i push it transparent then the problem solved.

[MHM Cisco World]

Sorry but as I know nexus only work as transparent vtp mode 

From cisco doc.

""VTP worked only in transparent mode.""

So how it was server mode???

MHM

[aguntukkk]

X5K-CoLoAsia# sh vtp status
VTP Status Information
----------------------
VTP Version : 3 (capable)
Configuration Revision : 14
Maximum VLANs supported locally : 1005
Number of existing VLANs : 45
VTP Operating Mode : Server
VTP Domain Name : <VTP domain not acquired/configured yet>
VTP Pruning Mode : Disabled (Operationally Disabled)
VTP Traps Generation : Disabled
MD5 Digest : 0x9D 0x30 0xB9 0x2D 0x42 0xCE 0xB9 0x79
0x7E 0x79 0xAE 0x4C 0x28 0xBC 0x71 0x71
VTP V2 Mode : Disabled

Configuration last modified by 172.16.7.5 at 1-6-25 11:34:33

Local updater ID is 172.16.7.5 on interface Vlan1090 (lowest VLAN interface found)
VTP version running : 1

[MHM Cisco World]

Thanks alot alot for your reply'

Last W what is exact N5K you have?

Thanks again 

MHM

[aguntukkk]

Hardware
cisco Nexus5548 Chassis ("O2 32X10GE/Modular Universal Platform Supervisor")
Intel(R) Xeon(R) CPU with 8253792 kB of memory.
Processor Board ID FOC16102EHD

Device name: NX5K-CoLoAsia
bootflash: 2007040 kB

Kernel uptime is 1 day(s), 0 hour(s), 58 minute(s), 56 second(s)

Last reset at 733142 usecs after Mon Jan 6 10:30:01 2025

Reason: Reset Requested by CLI command reload
System version: 7.3(8)N1(1)
Service: