09-24-2018 07:24 AM - edited 03-08-2019 04:13 PM
Hello!
Please, can someone explain me why I have a 1Gig buffer allocation conf on a 10Gig int? What can we tune?
Initially, I found errors on interfaces on a 3850 (ver 03.07.03E)
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Te1/0/1 0 0 0 0 0 0
Te1/0/2 0 0 40349970 0 0 40349970
Te1/0/3 0 0 0 0 0 0
Te1/0/4 0 0 0 0 0 0
Te1/0/5 0 0 0 0 0 0
Te1/0/6 0 0 144190 0 0 144190
Te1/0/7 0 0 3479472 0 0 3479472
I found this document from Cisco : Catalyst 3850: Troubleshooting Output drops
So I checked my conf
Switch#show platform qos queue config Te 1/0/7
DATA Port:6 GPN:7 AFD:Disabled QoSMap:0 HW Queues: 48 - 55
DrainFast:Disabled PortSoftStart:1 - 1080
----------------------------------------------------------
DTS Hardmax Softmax PortSMin GlblSMin PortStEnd
--- -------- -------- -------- --------- ---------
0 1 5 120 6 480 6 320 0 0 3 1440
1 1 4 0 7 720 3 480 2 180 3 1440
2 1 4 0 5 0 5 0 0 0 3 1440
3 1 4 0 5 0 5 0 0 0 3 1440
4 1 4 0 5 0 5 0 0 0 3 1440
5 1 4 0 5 0 5 0 0 0 3 1440
6 1 4 0 5 0 5 0 0 0 3 1440
7 1 4 0 5 0 5 0 0 0 3 1440
Priority Shaped/shared weight shaping_step
-------- ------------ ------ ------------
0 0 Shared 50 0
1 0 Shared 75 0
2 0 Shared 10000 26
3 0 Shared 10000 0
4 0 Shared 10000 120
5 0 Shared 10000 0
6 0 Shared 10000 48
7 0 Shared 10000 0
Weight0 Max_Th0 Min_Th0 Weigth1 Max_Th1 Min_Th1 Weight2 Max_Th2 Min_Th2
------- ------- ------ ------ ------ ------ ------ ------ ------
0 0 478 0 0 534 0 0 600 0
1 0 573 0 0 641 0 0 720 0
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0 0
We do not have policy applied
Switch#show policy-map int TenGigabitEthernet 1/0/7
Switch#
Default conf for a 10Gig Interface from the Cisco doc
3850#show platform qos queue config tenGigabitEthernet 1/0/37 DATA Port:1 GPN:37 AFD:Disabled QoSMap:0 HW Queues: 8 - 15 DrainFast:Disabled PortSoftStart:2 - 6480 ---------------------------------------------------------- DTS Hardmax Softmax PortSMin GlblSMin PortStEnd --- -------- -------- -------- --------- --------- 0 1 6 720 8 2880 7 1280 0 0 4 8640 1 1 4 0 9 4320 8 1920 3 1080 4 8640 2 1 4 0 5 0 5 0 0 0 4 8640 3 1 4 0 5 0 5 0 0 0 4 8640 4 1 4 0 5 0 5 0 0 0 4 8640
09-24-2018 12:58 PM
09-24-2018 11:37 PM
sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.07.03E RELEASE SOFTWARE (fc3)
If we updated the switch after its installation and configuration, can it have kept this configuration from the bug?
Also there must be no impact but the boot loader version is 3.58.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide