05-09-2007 11:10 PM - edited 03-05-2019 03:59 PM
2950 switch is crashed due to this bug and it effected entire IOS range. At preset there is no solution for this bug. Anybody faced this bug, would like to discuss on this issue.
05-09-2007 11:18 PM
Hi Srinivas,
Can you confirm which release are you running on your switch?
Ankur
05-09-2007 11:26 PM
currently switch is running the follwoing IOS - c2950-i6q4l2-mz.121-22.EA1b.bin
it's 12.1 (22) EA1B
05-09-2007 11:35 PM
Hi Srinivas,
However I see this in resolve status. Are you still facing the exact same issue?
Can you try the latest release 12.1(22)EA9.
Regards,
Ankur
05-09-2007 11:46 PM
Hi,
12.1(22)EA9. is also affected.
You need to get a new one from Cisco.
Regards,
Bjornarsb
05-09-2007 11:51 PM
HI,
yeah, Actuall that is the latest IOS from Cisco.It shows the follwoin message.
System was restarted by error - Signal 10, Exception code (0x0008)!, PC 0x8001183C
can anyone what is signal 10.
05-10-2007 12:11 AM
Hi,
Try this workaround:
http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K15464728
HTH, please rate if it does.
BR,
Bjornasrb
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide