Hi All
I'm having a problem with a connection to a storage device in our DC.
I have multiple there and there are many ACL's in on our Core (Bonded Pair) but they are the same rules to each storage device.
Applied via switch to get to the DC. I've compared the ACL's on each Core to see if there was a miss match but couldn't find any.
I keep getting packet loss to one on the storage nodes. Clients are on Vlan10 and Storage is on Vlan100.
Clients are currently configured to Vlan10 and ACL gives access to the storage.
If I did a trunk mode to the Client with a native vlan10
Would this allow me to trick/cheat the ACLs and give me a direct/better connection to confirm it's an ACL or possibly something else?
Or is there a better way to check and test this?
