C2960 Command not supported

[Gerard Daly]

Hi,

Does anyone know why the C2960 does not support the command ip tacacs source-interface?

I am running C2960-LANBASEK9-M), Version 12.2(44)SE  have multiple VLANs and want to specify my source traffic for TACACs.

Many thanks in advance,

Gerry

[subma · Accepted solution]

Hi Gerard,

The issue is because of the below bug

CSCsm28901

"ip tacacs source-interface" command missing in 12.2.44SE.

Symptom: The "ip tacacs source-interface" command is missing in 12.2(44)SE Workaround: Configure the source-interface under the TACACS server group. Example: Switch(config)# aaa group server tacacs+ test Switch(config-sg-tacacs+)# ip tacacs source-interface Vlan1 Switch(config-sg-tacacs+)# exit

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCsm28901

This bug is known to be fixed in 12.2(44)SE2

let me know how this works out for you.

Thanks

Subbiah

[Gerard Daly]

Hi Subbiah,

Many thanks for that!

Will let you know how it goes,

Best Regards,

Gerard

[Gerard Daly]

Hi Subbiah,

That worked a treat!

Thanks again,

Best Regards,

Gerard

[subma]

Hi Gerard,

Thanks for keeping me posted. Glad to hear that.

Have a good one

Thanks

Subbiah