c3560-24PS-s Switch with IPBase IOS

[Muhammad1Ali]

Dear Friends,

I have two switches of cisco c3560-24PS-s with IPbase ios installed. I need the routing OSPF and RIPv2 for my network.

But these switches not support OSPF while they can support RIPV2.

Can i upgrade this switch to any IPservices IOS that work ospf for me?

I tried one, it was showing all the thing about ospf: Like

(config)# Router ospf 100 was supporting but it was not working , not making the adjecency.

Please guide me and help me in this regards

Thanks

Ali Khan

[Leo Laohoo]

Can i upgrade this switch to any IPservices IOS that work ospf for me?

Yes.

[ABDUL RAHIMAN K.M]

Hi,

Please send the following outputs,(ip base)

sh ver

sh license summary

sh boot

[Muhammad1Ali]

1) Version= C3560-IPSERVICESK9-M), Version 12.2(55)SE7,

2) show boot

  BOOT path-list      : flash:/c3560-ipservicesk9-mz.122-55.SE7.bin

Config file         : flash:/config.text

Private Config file : flash:/private-config.text

Enable Break        : no

Manual Boot         : no

HELPER path-list    :

Auto upgrade        : yes

Auto upgrade path   :

NVRAM/Config file

      buffer size:   524288

Timeout for Config

          Download:    0 seconds

Config Download

       via DHCP:       disabled (next boot: disabled)

my provider updated it to Ipservices and ospf shows everything but not working

3) Show license summary

  This command is not recognized

[Jon Marshall]

If you switch is running IP Services then it may be your config.

Can you post the OPSF config from the switch and the other switches/routers that are running OSPF ?

What does "sh ip opsf neigh" show ?

Jon