10-30-2013 12:28 PM - edited 03-07-2019 04:20 PM
I'm having issues with Radius on this switch. I have recently upgraded to 12.2 (44) SE6. I enabled SSH and this is working fine I have checked my settings in on the radius server several times along with deleting the radius commands on the switch and re-entering them. Below is my aaa settings and radius settings.
aaa new-model
!
!
aaa authentication password-prompt PASSCODE---->
aaa authentication login default group radius local
aaa authorization exec default group radius local
!
!
!
aaa session-id common
radius-server host x.x.x.x. auth-port 1645 acct-port 1646 key 7 testtest
I just had a radius issue on a 2950 and I found my issue to be in the aaa settings but this doesn't seem to be the case on this switch.
thanks for the help
10-30-2013 12:33 PM
just to add a few points I can ping the radius server from the switch and can ping the switch from the radius server. when I look at the logs on the switch it shows me:
2w5d: %RADIUS-4-RADIUS_DEAD: RADIUS server x.x.x.x:1645,1646 is not respond ing.
2w5d: %RADIUS-4-RADIUS_ALIVE: RADIUS server x.x.x.x:1645,1646 has returned.
I'm not real clear what this means.
Thanks,
Derek
10-30-2013 12:39 PM
Derek
Basically it means that the switch send a request to the Radius server and got nothing in response. If you look in the Radius server are there logs which would indicate whether it recognized the switch or not? The symptoms you describe might indicate that the Radius server is not responding because it does not recognize the switch as a valid client.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide