C3560E-12D-S &TwinGig Converter Module in slot 5-12

[SeregaStr]

Hi Experts,

Cisco Catalyst C3560E-12D-S, switch undefine TwinGig Converter Module in 5-12 slot ,only 1-4 slot.

I have 8 TwinGig Converter Module with SFP in slot 1-8, but show inventory

Switch#sh inventory | include TwinGig

NAME: "Slot 1 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

NAME: "Slot 2 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

NAME: "Slot 3 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

NAME: "Slot 4 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

Switch#show logging | inc TwinGig

*Mar  1 00:04:11.507: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 1

*Mar  1 00:04:16.657: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 2

*Mar  1 00:04:21.825: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 3

*Mar  1 00:04:27.017: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 4

Module X2-10GB-LR define correct in any slot 1-12

Switch#show version

Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 15.0(1)SE, RELEASE SOFTWARE (fc1)

Licence level ipbase, but enable ipservices Evaluation licence no resolve problem.

I tryed in IOS c3560e-universal-mz.122-40.EX, c3560e-universalk9-mz.122-55.SE, c3560e-universalk9-mz.150-1.SE.

This is Hardware or software limitation Catalyst 3560E-12D-S?

Please help.

[Reza Sharifi]

Hi,

Can you make sure that the TwinGig Converter Modules in slot 5-12 are all the way inserted in to the slots?

Also, what happens if you pull out the TwinGig Converter Modules from slot 1-4 and put them in 5-12?

Do ports 5-12 come on line?

HTH

[SeregaStr]

Dear Reza,

today we sure that TwinGig Converter Modules inserted in to the slots 1-8 proper, in slots 9-12 inserted modules

X2-10GB-LR.

We take out TwinGig Converter Modules slot 2 and put them in slot 9, switch logged detaching module out slot 2, but not logged inserting module in slot 9. Show inventory undefine TwinGig Converter Module in slot 9. Reload switch not resolve problem.

Port configuration default, except Gi0/2 configured for management:

interface GigabitEthernet0/1

!

interface GigabitEthernet0/2

switchport trunk encapsulation dot1q

switchport trunk allowed vlan XX

switchport mode trunk

!

interface GigabitEthernet0/3

!

interface GigabitEthernet0/4

!

interface GigabitEthernet0/5

!

interface GigabitEthernet0/6

!

interface GigabitEthernet0/7

!

interface GigabitEthernet0/8

!

interface GigabitEthernet0/9

!

interface GigabitEthernet0/10

!

interface GigabitEthernet0/11

!

interface GigabitEthernet0/12

!

interface GigabitEthernet0/13

!

interface GigabitEthernet0/14

!

interface GigabitEthernet0/15

!

interface GigabitEthernet0/16

!

interface GigabitEthernet0/17

!

interface GigabitEthernet0/18

!

interface GigabitEthernet0/19

!

interface GigabitEthernet0/20

!

interface GigabitEthernet0/21

!

interface GigabitEthernet0/22

!

interface GigabitEthernet0/23

!

interface GigabitEthernet0/24

!

interface TenGigabitEthernet0/1

!

interface TenGigabitEthernet0/2

!

interface TenGigabitEthernet0/3

!

interface TenGigabitEthernet0/4

!

interface TenGigabitEthernet0/5

!

interface TenGigabitEthernet0/6

!

interface TenGigabitEthernet0/7

!

interface TenGigabitEthernet0/8

!

interface TenGigabitEthernet0/9

!

interface TenGigabitEthernet0/10

!

interface TenGigabitEthernet0/11

!

interface TenGigabitEthernet0/12

Switch#sh inventory

NAME: "1", DESCR: "WS-C3560E-12D"

PID: WS-C3560E-12D-S   , VID: V02  , SN: XXXXXXXXXXX

NAME: "Power Supply 1", DESCR: "FRU Power Supply"

PID: C3K-PWR-300WAC    , VID: 1    , SN: XXXXXXXXXXX

NAME: "Slot 1 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

PID: 800-27645-02      , VID: B0   , SN: XXXXXXXXXXX    

NAME: "GigabitEthernet0/1", DESCR: "10/100/1000BaseTX SFP"

NAME: "GigabitEthernet0/2", DESCR: "10/100/1000BaseTX SFP"

NAME: "Slot 2 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

PID: 800-27645-02      , VID: B0   , SN: XXXXXXXXXXX    

NAME: "GigabitEthernet0/3", DESCR: "10/100/1000BaseTX SFP"

NAME: "GigabitEthernet0/4", DESCR: "10/100/1000BaseTX SFP"

NAME: "Slot 3 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

PID: 800-27645-02      , VID: B0   , SN: XXXXXXXXXXX    

NAME: "GigabitEthernet0/5", DESCR: "10/100/1000BaseTX SFP"

NAME: "GigabitEthernet0/6", DESCR: "10/100/1000BaseTX SFP"

NAME: "Slot 4 - TwinGig Converter Module", DESCR: "TwinGig Converter Module"

PID: 800-27645-02      , VID: B0   , SN: XXXXXXXXXXX   

NAME: "GigabitEthernet0/7", DESCR: "10/100/1000BaseTX SFP"

NAME: "GigabitEthernet0/8", DESCR: "10/100/1000BaseTX SFP"

NAME: "TenGigabitEthernet0/9", DESCR: "10GBase-LR"

NAME: "TenGigabitEthernet0/10", DESCR: "10GBase-LR"

NAME: "TenGigabitEthernet0/11", DESCR: "10GBase-LR"

NAME: "TenGigabitEthernet0/12", DESCR: "10GBase-LR"

[SeregaStr]

------------------ show interfaces status ------------------

Port      Name               Status       Vlan       Duplex  Speed Type

Gi0/1                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Gi0/2                        connected    trunk      a-full a-1000 10/100/1000BaseTX SFP

Gi0/3                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Gi0/4                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Gi0/5                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Gi0/6                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Gi0/7                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Gi0/8                        notconnect   1            auto   auto 10/100/1000BaseTX SFP

Te0/5                        notconnect   1            full    10G Not Present

Te0/6                        notconnect   1            full    10G Not Present

Te0/7                        notconnect   1            full    10G Not Present

Te0/8                        notconnect   1            full    10G Not Present

Te0/9                        notconnect   1            full    10G 10GBase-LR

Te0/10                       notconnect   1            full    10G 10GBase-LR

Te0/11                       notconnect   1            full    10G 10GBase-LR

Te0/12                       notconnect   1            full    10G 10GBase-LR

Fa0                          disabled     routed       auto   auto 10/100BaseTX