01-15-2010 05:33 AM - edited 03-06-2019 09:18 AM
Which image will load on the Cisco 3750 switch.
Server-SW_A#show boot
BOOT path-list : flash:c3750e-universalk9-mz.122-44.SE.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
Timeout for Config
Download: 0 seconds
Config Download
via DHCP: disabled (next boot: disabled)
-------------------
Switch 1
-------------------
BOOT path-list : flash:c3750e-universal-mz.122-44.SE1.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : no
Auto upgrade path :
Server-SW_A#
01-16-2010 04:43 AM
Hi,
The following output shows Cisco 3750 switch stack comprised of two switches if yes then both switches show they are booting from flash:
If you want to change the path use the following command in switches
switch(config)#boot system switch all flash:c3750-ipbasek9-mz.122-37.SE.bin
Hope that helps out your query !!
If helpful do rate the valuable post.
Regards
Ganesh.H
01-17-2010 01:34 PM
12.2(44)SE1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide