C6500 show command

[yong khang NG]

Hi Forumers'

I booting up a C65606-E chassis, i would like to ask about some IOS command how i can retrieve all the serial number of every component install on the box

i know "show idprom " can show the serial number on the FRU unit.

But how can i check the item on memory, example

MEM-C6K-CPTFL1BG = catalyst 6500 compact flash memory 1GB

i have these to check somehow

a. BF-S720-64MB-RP

b. MEM-XCEF720-256M

c. MEM-C6K-APP-24GB

kidnly guide me the IOS command to view on this.

Noel

[Somasundaram Jayaraman]

Hi,

I believe you can check this using show diag command.

Sample sh diag output

cisco#sh diag

Slot 3: Logical_index 6

    2 port adapter FlexWAN controller

    Board is analyzed ipc ready

    HW rev 1.5, board revision A0

    Serial Number: SAD063700R8 Part number: 73-3869-08

    Slot database information:

    Flags: 0x2004    Insertion time: 0x19838 (20:41:59 ago)

    Controller Memory Size:

        112 MBytes CPU Memory

        16 MBytes Packet Memory

        128 MBytes Total on Board SDRAM

    IOS (tm) cwlc Software (cwpa-DW-M), Version 12.2(18)SXF5, RELEASE

SOFTWARE (fc3)

Slot 3: Logical_index 7

    2 port adapter FlexWAN controller

    Board is analyzed ipc ready

    HW rev 1.5, board revision A0

    Serial Number: SAD063700R8 Part number: 73-3869-08

    Slot database information:

    Flags: 0x2004    Insertion time: 0x18DC8 (20:42:01 ago)

    Controller Memory Size:

        112 MBytes CPU Memory

        16 MBytes Packet Memory

        128 MBytes Total on Board SDRAM

    IOS (tm) cwlc Software (cwpa-DW-M), Version 12.2(18)SXF5, RELEASE

SOFTWARE (fc3)

    PA Bay 1 Information:

        ENHANCED ATM OC3 SMI PA, 1 ports, FRU: PA-A3-OC3-SMI

        EEPROM format version 4

        HW rev 2.00, Board revision A0

        Serial number: JAE072406LG  Part number: 73-8729-01

Slot 4: Logical_index 8

    2 port adapter FlexWAN controller

    Board is analyzed ipc ready

    HW rev 1.5, board revision A0

    Serial Number: SAD063700RE Part number: 73-3869-08

    Slot database information:

    Flags: 0x2004    Insertion time: 0x198CC (20:41:59 ago)

    Controller Memory Size:

        112 MBytes CPU Memory

        16 MBytes Packet Memory

        128 MBytes Total on Board SDRAM

    IOS (tm) cwlc Software (cwpa-DW-M), Version 12.2(18)SXF5, RELEASE

Hope this helps

Cheers

Somu

Rate helpful posts

[yong khang NG]

hi sir

thanks for the reply

i using 12.2 (33) SXJ1, i guess there no more sh diag output this command..

anyway round?

thanks again

[Leo Laohoo]

sh inv | i SN:

[mlund]

Hi Noel

Try" show inventory" it will display serial numbers from modules, not sure about memory's.

/Mikael