cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1252
Views
0
Helpful
7
Replies

C6816-X-LE upgrade steps which is in stack

akshayj2019
Level 1
Level 1

Need to help to know about cisco switch C6816-X-LE upgrade steps which is in the stack with Command 

7 Replies 7

Leo Laohoo
Hall of Fame
Hall of Fame

What is the current version and what is the target version?

Current version is Version 15.2(02),  cisco recommend version is 15.5.1-SY10 MD

 

Ok, post the complete output to the following commands

  1. sh run | include boot
  2. sh boot
  3. sh module

 

  1. Show version  :-

 

BFLAF_CORE_SW#show ver

BFLAF_CORE_SW#show version

Cisco IOS Software, c6848x Software (c6848x-IPSERVICESK9_NPE-M), Version 15.5(1)SY10, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2022 by Cisco Systems, Inc.

Compiled Wed 27-Jul-22 15:24 by mcpre

 

ROM: System Bootstrap, Version 15.2(02)SY [Rel 1.0], RELEASE SOFTWARE

 

BFLAF_CORE_SW uptime is 17 weeks, 5 days, 16 hours, 54 minutes

Uptime for this control processor is 17 weeks, 5 days, 16 hours, 45 minutes

System returned to ROM by power-on

System restarted at 21:15:02 ist Fri Feb 10 2023

System image file is "bootdisk:c6848x-ipservicesk9_npe-mz.SPA.155-1.SY10.bin"

Last reload reason: Reload Command

 

 

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

Cisco C6816-X-LE ( Intel(R) Pentium(R) CPU  @ 2.00GHz ) processor (revision ) with 2994149K/409600K bytes of memory.

Processor board ID FDO2007L00P

Processor signature 0xA9060300

Last reset from power-on

23 Virtual Ethernet interfaces

1 Gigabit Ethernet interface

32 Ten Gigabit Ethernet interfaces

1955824K bytes of USB Flash bootdisk (Read/Write)

 

Configuration register is 0x2102

 

BFLAF_CORE_SW#

 

  1. show run | include boot

 

BFLAF_CORE_SW#sh

BFLAF_CORE_SW#show run

BFLAF_CORE_SW#show running-config | i boot

boot-start-marker

boot system bootdisk:c6848x-ipservicesk9_npe-mz.SPA.155-1.SY10.bin

boot-end-marker

no ip bootp server

snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail

diagnostic bootup level minimal

BFLAF_CORE_SW#

BFLAF_CORE_SW#

BFLAF_CORE_SW#

 

 

3.show boot

 

 

BFLAF_CORE_SW#show boot

BOOT variable = bootdisk:c6848x-ipservicesk9_npe-mz.SPA.155-1.SY10.bin,12;

CONFIG_FILE variable =

BOOTLDR variable =

Configuration register is 0x2102

 

Standby BOOT variable = bootdisk:c6848x-ipservicesk9_npe-mz.SPA.155-1.SY10.bin,12;

Standby CONFIG_FILE variable =

Standby BOOTLDR variable =

Standby Configuration register is 0x2102

Da fuq?

The switch is already on 15.5(1)SY10.

15.2(2)SY is the ROMMON version.

yes, we observed that but I want to know the process for upgrading this switch as it is in VSS.

A good guide on how to upgrade the switch (in VSS), including ROMMON, can be found HERE.