I have one C7609 and one C6509. Now I plan to upgrade the supervisor to VS-S720,but I don't know whether the new supervisor module have compatibility with my old modules. Anybody have the answer?
Here are the hardware lists:
6509#sh module
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------ -----------
2 8 8 port 1000mb ethernet WS-X6408-GBIC
3 48 48 port 10/100 mb RJ-45 ethernet WS-X6248-RJ-45
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE
8 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SA
Mod Sub-Module Model Hw Status
--- --------------------------- ------------------ ------------ ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3A 2.0 Ok
5 MSFC3 Daughterboard WS-SUP720 2.0 Ok
8 Centralized Forwarding Card WS-F6700-CFC 4.1 Ok
7609#sh module
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------ -----------
1 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE
7 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
9 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
Mod Sub-Module Model Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card WS-F6K-DFC3A 2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3A 2.2 Ok
5 MSFC3 Daughterboard WS-SUP720 2.2 Ok
7 Centralized Forwarding Card WS-F6700-CFC 4.1 Ok
