cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
325
Views
0
Helpful
3
Replies

C9200L-24T-4X Boot Problem

Junak
Level 1
Level 1

  


Initializing Hardware...

System Bootstrap, Version 17.9.1r [FC13], RELEASE SOFTWARE (P)
Compiled Thu 06/08/2023 20:36:25 by rel

Current ROMMON image : Primary
C9200L-24T-4X platform with 2097152 Kbytes of main memory

boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf

##############


*** Stack adapter authentication failed on stack port 1 on switch 2 ***


Stack Adapter Auth Fail : SIF_SERDES_CABLE_EASTBOUND

*** Stack adapter authentication failed on stack port 2 on switch 2 ***


Stack Adapter Auth Fail : SIF_SERDES_CABLE_WESTBOUND
Both links down, not waiting for other switches
Switch number is 2

Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode
May 12 06:31:28.313: %PMAN-5-EXITACTION: C0/0: pvp: Process manager is exiting: reload cc action requested
May 12 06:31:28.860: %PMAN-5-EXITACTION: F0/0: pvp: Process manager is exiting: reload fp action requested
May 1705: %PMAN-5-EXITACTION: R0/0: pvp: Process manager is exiting: rp processes exit with reload switch code

 

Initializing Hardware...

System Bootstrap, Version 17.9.1r [FC13], RELEASE SOFTWARE (P)
Compiled Thu 06/08/2023 20:36:25 by rel

Current ROMMON image : Primary
C9200L-24T-4X platform with 2097152 Kbytes of main memory

boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf

3 Replies 3

remove the stack cable but no change the switch.Os not load this and usb not supported?


@Junak wrote:
remove the stack cable but no change the switch.Os not load this and usb not supported?

Contact Cisco TAC and organize for an RMA. 

CSCvs42280

FN70506 - Authentication Failure Observed on C9200/C9200L Switches When a Stacking Cable, Stack Adapter, or Network Module Is Inserted in the Switch