06-28-2023 11:47 AM
C9500-24Y4C: Cisco Catalyst 9500 Series does this support RJ45 ports if not which type of SFP i need to use to make it RJ45 ports. What is the maximum length supported If I use 10G RJ45 sfp?
06-28-2023 11:57 AM - edited 06-28-2023 11:59 AM
Hi
This switch is SFP ports.
RJ45 is always 100m maximum dont matter if SFP or standard RJ45 connector.
06-28-2023 12:02 PM
Can you tell me the model of the SFP which support 100m 10G speed?
06-28-2023 12:07 PM
Here we go!
Table 1, details the specifications for the SFP-10G-T-X module, including cable type, distance, and data rates supported.
Table 1. SFP-10G-T-X cabling specifications
Cisco PIDs |
Speeds |
Cable Type |
Distance |
Max. Power Consumption (W) |
SFP-10G-T-X |
10Gbps |
Cat6A/Cat7 or better |
Up to 30 meters |
2.5W |
SFP-10G-T-X |
100M/1Gbps |
Cat5e/Cat6A/Cat7 or better |
Up to 100 meters |
1.0W |
06-28-2023 12:05 PM
i got one model SFP-10G-T-X which support only till 30metre with 10G speed
06-28-2023 12:11 PM
Yes, for 10Giga.
I would say it goes more than that, but, if we stick with the datasheet, 10G would be 30 Meters.
06-28-2023 12:33 PM
I reply you your other post check my reply.
thanks
07-03-2023 05:05 AM
How can I connect a c9500 switch to C9200 with 10G capable RJ45 cable & the distance between them is 70m?
07-03-2023 05:13 AM
Hi
Theorically is not possible, it would require fiber as Copper will reach 30 meters maximum.
07-03-2023 10:54 AM
For 70m copper, you'll need Cat6a (not Cat6) or Cat7, the latter though doesn't expect to use RJ45 connectors.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide