cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
253
Views
0
Helpful
1
Replies

C9500 ReloadRecovery | 17.06.04 | Sw01 reason ReloadRovery.

taxmanx1992
Level 1
Level 1

Cisco IOS XE Software, Version 17.06.04

------------------ show stackwise-virtual dual-active-detection pagp ------------------

Pagp dual-active detection enabled: Yes
In dual-active recovery mode: No
Recovery Reload: Enabled


Channel group 3
Dual-Active Partner Partner Partner
Port Detect Capable Name Port Version
Te1/0/3 Yes DMT-ASW-C9200-01-SS- Te1/1/1 1.1
Te2/0/3 Yes DMT-ASW-C9200-01-SS- Te1/1/2 1.1


------------------ dir crashinfo-1: ------------------


Directory of crashinfo-1:/

55217 drwx 28672 Jul 6 2024 19:35:54 +07:00 tracelogs
7889 drwx 4096 Jul 3 2024 18:38:11 +07:00 license_evlog
17 -rw- 2877145 Jul 3 2024 18:31:03 +07:00 SV_DMT-CSW-C9500-01-SS-PZ_1_RP_0_20240703-183103-20240703-183103.tar.gz
16 -rw- 2881060 Jul 3 2024 18:31:03 +07:00 DMT-CSW-C9500-01-SS-PZ_1_RP_0_trace_archive_0-20240703-183102.tar.gz
15 -rw- 1218941 Aug 31 2020 14:37:42 +07:00 DMT-CSW-C9500-01-SS-PZ_1_RP_0_trace_archive-20200831-143742.tar.gz
14 -rw- 1207142 Aug 31 2020 14:37:37 +07:00 DMT-CSW-C9500-01-SS-PZ_1_RP_0_trace_archive_0-20200831-143737.tar.gz
13 -rw- 1202993 May 19 2020 15:52:05 +07:00 Switch_1_RP_0_trace_archive-20200519-155204.tar.gz
12 -rw- 1514721 May 11 2020 17:05:01 +07:00 Switch_1_RP_0_trace_archive-20200511-100500.tar.gz
11 -rw- 0 Mar 16 2020 16:17:14 +07:00 koops.dat

1651507200 bytes total (1540358144 bytes free)

 

Jul 3 18:31:02.965: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 2: EMP_RELAY: Channel UP!
Jul 3 18:31:02.969: %PLATFORM-6-HASTATUS: RP switchover, received chassis event to become active
Jul 3 18:31:02.969: GRACEFUL-RELOAD: Wrong state: 0 to recieve chasfs event:

Jul 3 18:31:02.980: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_NOT_PRESENT)
Jul 3 18:31:02.980: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN)
Jul 3 18:31:02.981: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_REDUNDANCY_STATE_CHANGE)
Jul 3 18:31:02.994: %PLATFORM-6-HASTATUS: RP switchover, sent message became active. IOS is ready to switch to primary after chassis confirmation
Jul 3 18:31:03.012: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
Jul 3 18:31:03.035: %PLATFORM-6-HASTATUS: RP switchover, received chassis event became active
Jul 3 18:31:03.036: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A inserted
Jul 3 18:31:03.036: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A removed
Jul 3 18:31:03.036: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A powered on
Jul 3 18:31:03.038: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A inserted
Jul 3 18:31:03.038: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B inserted
Jul 3 18:31:03.039: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B removed
Jul 3 18:31:03.039: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B powered on
Jul 3 18:31:03.040: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B inserted
Jul 3 18:31:03.041: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply A inserted
Jul 3 18:31:03.041: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply A removed
Jul 3 18:31:03.042: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply A powered on
Jul 3 18:31:03.043: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply A inserted
Jul 3 18:31:03.043: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply B inserted
Jul 3 18:31:03.044: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply B removed
Jul 3 18:31:03.044: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply B powered on
Jul 3 18:31:03.045: %PLATFORM_FEP-6-FRU_PS_OIR: Switch 2: FRU power supply B inserted
Jul 3 18:31:02.954: %NIF_MGR-6-PORT_CONNECTION_STATUS_CHANGE: Switch 2 R0/0: nif_mgr: PORT:TenGigabitEthernet Port 15 changed state from Ready to Timeout.
Jul 3 18:31:02.954: %NIF_MGR-6-PORT_CONN_TIMEOUT: Switch 2 R0/0: nif_mgr: TenGigabitEthernet Port 15 on front side stack link 0 connection has TIMEOUT: CONN_ERR_CONN_TIMEOUT_ERR
Jul 3 18:31:02.955: %NIF_MGR-6-STACK_LINK_DOWN: Switch 2 R0/0: nif_mgr: Front side stack link 0 is DOWN.
Jul 3 18:31:02.955: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 1 on Switch 2 is down
Jul 3 18:31:02.955: %STACKMGR-4-SWITCH_REMOVED: Switch 2 R0/0: stack_mgr: Switch 1 has been removed from the stack.
Jul 3 18:31:03.244: %PLATFORM-6-HASTATUS_DETAIL: RP switchover, received chassis event became active. Switch to primary (count 1)
Jul 3 18:31:03.245: %HA-6-SWITCHOVER: Route Processor switched from standby to being active
Jul 3 18:31:03.343: Unable to set IPV4 table id for BT interface

Jul 3 18:31:03.345: Unable to set IPV6 table id for BT interface

1 Reply 1

marce1000
VIP
VIP

 

  - Possibly a partner in the stackwise virtual pair became unavailable due to (external) power loss. Or it could have been a crash , in that case upgrade to the latest advisory software version for the particular 9500 model and check if that can help , 

  M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card