cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1440
Views
0
Helpful
4
Replies

Can we connect Wireless guest network to ASA?

mbsiddiqui1
Level 1
Level 1

Hi,

 

 

We have two ISP 1. MPLS and 2. For Guest - Fiber Broadband. How to secure our Corporate Network from Guest Network as both are connected to our Cisco ASA5515.

 

Regards,

Mohammed

 

2 Accepted Solutions

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

You can deploy access list to block communication between the corporate and guest vlan and only allow access to the Internet for guest vlan.

HTH

View solution in original post

Seb Rupik
VIP Alumni
VIP Alumni

Hi there,

Create a new Guest VRF on your core switch. It should contain all your guest wireless interfaces and a point-to-point link to your ASA.

This will keep traffic seperated on your core, there only way devices in different VRFs will be able to communicate will be via the ASA.

 

cheers,

Seb.

View solution in original post

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

You can deploy access list to block communication between the corporate and guest vlan and only allow access to the Internet for guest vlan.

HTH

Seb Rupik
VIP Alumni
VIP Alumni

Hi there,

Create a new Guest VRF on your core switch. It should contain all your guest wireless interfaces and a point-to-point link to your ASA.

This will keep traffic seperated on your core, there only way devices in different VRFs will be able to communicate will be via the ASA.

 

cheers,

Seb.

Most of the staff will connect to guest wifi. How can I allow and access Exchange ActiveSync using the Guest Wireless? 

 

Regards,

Mohammed

Hi,

As long as the guest is in a separate vlan/subnet, you can use the access-list to allow exchange ActiveSync IPs to communicate with guest and also have them access the Internet. As for DNS on guest network, you can point them to an external DNS (8.8.8.8).

HTH

Review Cisco Networking for a $25 gift card