Can you run a WS-C4510R+E with C9300-48P

[bobpies]

Im working on a case for a customer and asked for their switch model and OS version.

They sent me the below in blue (sensitive info removed)

Is it possible to run a WS-C4510R+E with a C9300-48P ?

Please see the details below:

hostnameXXX (ip x.x.x.x)

Switch Ports Model SW Version SW Image Mode

------ ----- ----- ---------- ---------- ----

* 1 64 C9300-48P 16.9.3 CAT9K_IOSXE INSTALL

2 64 C9300-48P 16.9.3 CAT9K_IOSXE INSTALL

hostnameXXX (ip x.x.x.x)

cisco WS-C4510R+E (P5040) processor (revision 2) with 4194304K bytes of physical memory.

Processor board ID XXXXXXXXXX

[marce1000]

                        >...Is it possible to run a WS-C4510R+E with a C9300-48P ?
 - It depends a bit on what is meant by the question , they can perfectly coexist on the same network, provided robust and integrated  vlan management and spanning tree consistencies (or setup). You can't have (hot) failover , for instance, 

 M.

[Leo Laohoo]

The person who sent that "cut-n-paste" is trying to be secretive.  

The 4500 and the 9300 are two different OS entirely.  

[bobpies]

That's what I was thinkin. Thanks for the replies all.