cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
354
Views
2
Helpful
6
Replies

Cannot access another switch

Kruger
Level 1
Level 1

I've got a network setup similar to this https://community.cisco.com/t5/switching/accessing-other-switches-from-core-switch/td-p/4869021, so the problem. 

3650 switch - as a core and 2960 as an access switch.
The scheme is simple:
(router) -trunk- (Gi1/0/5 | core sw | Gi1/0/23) -trunk- (Gi1/0/21 | access sw)
172.20.190.1 - 172.20.190.11 - 172.20.190.11
management VLAN is 190, native VLAN 190 everywhere
I can ping core switch from router and vice versa, but I cannot ping access switch even from the core switch.
I tried to turn on ip routing, point to core switch as a gw, tried ACLs - no luck at all.
Here's my running configs
Any help will be appreciated!

1 Accepted Solution

Accepted Solutions