Cannot add mac hmac-sha2-512 hmac-sha2-256 to switch

[jeaston]

i don't have the option for hmac-sha2-512 hmac-sha2-25

25_2960X_15(config)#ip ssh server algorithm mac ?
hmac-sha1 HMAC-SHA1 (digest length = key length = 160 bits)
hmac-sha1-96 HMAC-SHA1-96 (digest length = 96 bits, key length = 160 bits)

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960S-48FPS-L 15.2(2)E9 C2960S-UNIVERSALK9-M

Any thoughts?

Thanks

[Reza Sharifi]

According to this document, It appears you can enable it in 15.5.(2)

Cisco IOS 15.5(2)T

This command was integrated into Cisco IOS Release 15.5(2)T.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/d1/sec-d1-cr-book/sec-cr-i3.html#wp6958353100

[M02@rt37]

Hello @jeaston 

Jump to the recommended version 15.2.7E9. 

Version 15.2.7(E7) supported algorithms for MAC are

-MAC Algorithms:hmac-sha2-256,hmac-sha2-512,hmac-sha1,hmac-sha1-96

[jeaston]

The switch is a Catalyst 2960S-48FPS-L Switch running 15.2.2E9 MD. This looks like the most resent code 11-Sep-2018.

Any ideas on a path forward?

Thanks in advance