Cannot Ping A Cisco 2960 Switch

[avneet.singh]

Hi

I have a Cisco 2960 switch which is connected to a Cisco 3560 switch. I am able to ping the 3560 but not the 2960. The 2960 is working fine and so are all the devices and PC's connected to it.

I have attached the configs of both the switches. Hope someone can help me out. Thanks

[Reza Sharifi · Accepted solution]

Hi Avneet,

Looking at your config below vlan1 is shutdown.  Do a "no sh" under vlan1 and test again.

interface Vlan1
ip address 10.1.2.11 255.255.0.0
no ip route-cache
shutdown

HTH

Reza

[avneet.singh]

Thanks mate. That worked

[Reza Sharifi]

Glad to help

Thanks for the rating

[mickmcguinness]

A big help to resolve an annoying little problem!

Cheers