- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-19-2013 09:15 AM - edited 03-07-2019 04:40 PM
Ok.. Good day, I have an ASA 5510 and a 2921 -
My ASA is used for VPN and Internet
My 2921 is used to connect different subnets
I also have an attached diagram
I have a directly connected interface on 2921-10.10.10.1 to the ASA 10.10.10.2
Also on the 2921 i have a subnet 192.168.2.0 and 10.20.30.0
I have trunk link on my switch 2950 from the 2921... The ASA is aslo connected to the switch
on the ASA
Int0/0 66.xxx.xxx.xxx internet
Int0/1 10.20.60.2 - Gateway for computers
Int0/2 10.10.10.2 - connected to 2921
on the 2921
gig0/1 10.10.10.1 - connected to ASA
gig0/1.20 sub-if 192.168.2.1
gig0/1.30 sub-if 10.20.30.1
I have connected some static routes to get from 10.20.60.0 to 192.168.2.0
I cannot ping 10.10.10.2 from my PC
I cannot ping 10.20.60.2 from my 2921
I would appreciate any ideas for configuration help... And redesign...
What cannot happen is for us to use the 2921 for vpn and internet..
Thanks,,, see image.
Solved! Go to Solution.
- Labels:
-
Other Switching
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2014 02:16 PM
Roger
Can you start a new thread for this as my browser keeps hanging every time i try to open or post a reply into this thread.
And i suspect we may well be sending a few more replies each to get this working
Jon

- « Previous
- Next »