- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-26-2012 09:10 PM - edited 03-07-2019 08:00 AM
I have a 2811 hook up to a 3750. For some reason I cannot ping loopback address, The loopback is for a cme.
configuration of 2811 looks like this as well as 3750.. any ideas
IP phones seem to register and work. I noticed while trying to upgrade code on the 2811 and it kept failing. I tried extended ping using other sources no luck..
I do this all the time so I am surprised at this I think I am loosing my mind
Thanks in advance
****** 2811 ****** ios 15.1.3 advipservices
interface Loopback0
ip address 192.168.151.1 255.255.255.0
!
interface FastEthernet0/0
description fast 0/0
no ip address
duplex full
speed 100
!
interface FastEthernet0/0.1
encapsulation dot1Q 152
ip address 192.168.152.1 255.255.255.0
p route 0.0.0.0 0.0.0.0 192.168.152.254
ip route 192.168.0.0 255.255.0.0 192.168.152.254
ip route 192.168.20.0 255.255.255.0 192.168.20.1
ip route 192.168.151.2 255.255.255.255 Internal-Service-Module0/0
interface FastEthernet1/0/14
description weir test
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
speed 100
duplex full
interface Vlan151
ip address 192.168.151.254 255.255.255.0
ip helper-address 192.168.151.1
!
interface Vlan152
ip address 192.168.152.254 255.255.255.
ip helper-address 192.168.151.1
ip route 172.16.30.0 255.255.255.0 172.16.30.1
ip route 192.168.151.0 255.255.255.0 192.168.152.1
ip route 192.168.152.0 255.255.255.0 192.168.152.1
C 192.168.123.0/24 is directly connected, Vlan123
C 192.168.122.0/24 is directly connected, Vlan122
C 192.168.121.0/24 is directly connected, Vlan121
C 192.168.151.0/24 is directly connected, Vlan151
C 192.168.110.0/24 is directly connected, Vlan110
C 192.168.162.0/24 is directly connected, Vlan162
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.30.0 is directly connected, Vlan30
C 192.168.161.0/24 is directly connected, Vlan161
C 192.168.141.0/24 is directly connected, Vlan141
S 9.0.0.0/8 [1/0] via 192.168.20.254
C 192.168.20.0/24 is directly connected, Vlan20
C 192.168.142.0/24 is directly connected, Vlan142
C 192.168.172.0/24 is directly connected, Vlan172
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Vlan10
C 192.168.0.0/24 is directly connected, Vlan100
C 192.168.171.0/24 is directly connected, Vlan171
C 192.168.152.0/24 is directly connected, Vlan152
S* 0.0.0.0/0 [1/0] via 192.168.20.254
C 192.168.123.0/24 is directly connected, Vlan123
C 192.168.122.0/24 is directly connected, Vlan122
C 192.168.121.0/24 is directly connected, Vlan121
C 192.168.151.0/24 is directly connected, Vlan151
C 192.168.110.0/24 is directly connected, Vlan110
C 192.168.162.0/24 is directly connected, Vlan162
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.30.0 is directly connected, Vlan30
C 192.168.161.0/24 is directly connected, Vlan161
C 192.168.141.0/24 is directly connected, Vlan141
S 9.0.0.0/8 [1/0] via 192.168.20.254
C 192.168.20.0/24 is directly connected, Vlan20
C 192.168.142.0/24 is directly connected, Vlan142
C 192.168.172.0/24 is directly connected, Vlan172
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Vlan10
C 192.168.0.0/24 is directly connected, Vlan100
C 192.168.171.0/24 is directly connected, Vlan171
C 192.168.152.0/24 is directly connected, Vlan152
S* 0.0.0.0/0 [1/0] via 192.168.20.254
interface Loopback0
ip address 192.168.151.1 255.255.255.0
!
interface FastEthernet0/0
description fast 0/0
no ip address
duplex full
speed 100
!
interface FastEthernet0/0.1
encapsulation dot1Q 152
ip address 192.168.152.1 255.255.255.0
p route 0.0.0.0 0.0.0.0 192.168.152.254
ip route 192.168.0.0 255.255.0.0 192.168.152.254
ip route 192.168.20.0 255.255.255.0 192.168.20.1
ip route 192.168.151.2 255.255.255.255 Internal-Service-Module0/0
PSTN-GWY#sh ip rout
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.152.254 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.152.254
S 192.168.0.0/16 [1/0] via 192.168.152.254
192.168.151.0/24 is variably subnetted, 3 subnets, 2 masks
C 192.168.151.0/24 is directly connected, Loopback0
L 192.168.151.1/32 is directly connected, Loopback0
S 192.168.151.2/32 is directly connected, Internal-Service-Module0/0
192.168.152.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.152.0/24 is directly connected, FastEthernet0/0.1
L 192.168.152.1/32 is directly connected, FastEthernet0/0.1
**************************************************************** 3750 IOS 12.2.46
interface FastEthernet1/0/14
description test
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
speed 100
duplex full
interface Vlan151
ip address 192.168.151.254 255.255.255.0
ip helper-address 192.168.151.1
!
interface Vlan152
ip address 192.168.152.254 255.255.255.0
ip helper-address 192.168.151.1
ip route 172.16.30.0 255.255.255.0 172.16.30.1
ip route 192.168.151.0 255.255.255.0 192.168.152.1
ip route 192.168.152.0 255.255.255.0 192.168.152.1
C 192.168.123.0/24 is directly connected, Vlan123
C 192.168.122.0/24 is directly connected, Vlan122
C 192.168.121.0/24 is directly connected, Vlan121
C 192.168.151.0/24 is directly connected, Vlan151
C 192.168.110.0/24 is directly connected, Vlan110
C 192.168.162.0/24 is directly connected, Vlan162
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.30.0 is directly connected, Vlan30
C 192.168.161.0/24 is directly connected, Vlan161
C 192.168.141.0/24 is directly connected, Vlan141
S 9.0.0.0/8 [1/0] via 192.168.20.254
C 192.168.20.0/24 is directly connected, Vlan20
C 192.168.142.0/24 is directly connected, Vlan142
C 192.168.172.0/24 is directly connected, Vlan172
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Vlan10
C 192.168.0.0/24 is directly connected, Vlan100
C 192.168.171.0/24 is directly connected, Vlan171
C 192.168.152.0/24 is directly connected, Vlan152
S* 0.0.0.0/0 [1/0] via 192.168.20.254
Solved! Go to Solution.
- Labels:
-
Other Switching
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2012 01:52 AM
Hello Mike,
it looks like that the loopback address on the C2811 is overlapping with
interface Loopback0
ip address 192.168.151.1 255.255.255.0
!
interface Vlan151
ip address 192.168.151.254 255.255.255.0
defined on the switch (or internal service module it is not clear)
the static route on the switch is not effective as the switch (or service module) sees IP subnet 192.168.151.0 as directly connected and attempts to make an ARP request for IP 192.168.151.1 no device answers and the communication fails.
One between C2811 loopback and SVI Vlan151 has to be modified with a different IP subnet.
Hope to help
Giuseppe
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2012 07:46 AM
Your Loopback is in the same network tha your Vlan 151 and the router gives priority to Vlan 151
C 192.168.151.0/24 is directly connected, Vlan151
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2012 01:52 AM
Hello Mike,
it looks like that the loopback address on the C2811 is overlapping with
interface Loopback0
ip address 192.168.151.1 255.255.255.0
!
interface Vlan151
ip address 192.168.151.254 255.255.255.0
defined on the switch (or internal service module it is not clear)
the static route on the switch is not effective as the switch (or service module) sees IP subnet 192.168.151.0 as directly connected and attempts to make an ARP request for IP 192.168.151.1 no device answers and the communication fails.
One between C2811 loopback and SVI Vlan151 has to be modified with a different IP subnet.
Hope to help
Giuseppe
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2012 07:46 AM
Your Loopback is in the same network tha your Vlan 151 and the router gives priority to Vlan 151
C 192.168.151.0/24 is directly connected, Vlan151
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-31-2012 06:04 PM
Both of you were right on.. Another stupid mistake
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-30-2012 08:18 AM
Giuseppe Thank You Great call.. I am not sure how I missed that and I hate to say I worked on for a few hours
I looked at it and just went past it.
Thanks
