06-12-2014 03:34 PM - edited 03-07-2019 07:43 PM
hello,
could you pls help about resolving a host name of a switch 2960,
i can connect on this switch by telnet 10.10.10.1,but i can't ping/resolve the host name'sw1-12'
Best regard
J h
Solved! Go to Solution.
06-12-2014 05:04 PM
JH,
You will need an entry added DNS server to translate the name to ip address or
add the name to your HOSTS file on your PC that you are aceessing from.
Hope this helps
Regards
Alex
06-13-2014 12:31 AM
Hello
You need an static entry in your dns server or pc hosts file
Just remember if you edit your hosts file on your pc, Then your pc will always check that file before any dns server
C:\Windows\System32\drivers\etc
R/C on the file = hosts and untick read only
#
#
#
10.10.10.1 sw1-12
save your changes.
then - start/run/cmd
ipconfig /flushdns
ipconfig /registerdns
res
Paul
06-12-2014 05:04 PM
JH,
You will need an entry added DNS server to translate the name to ip address or
add the name to your HOSTS file on your PC that you are aceessing from.
Hope this helps
Regards
Alex
06-13-2014 12:31 AM
Hello
You need an static entry in your dns server or pc hosts file
Just remember if you edit your hosts file on your pc, Then your pc will always check that file before any dns server
C:\Windows\System32\drivers\etc
R/C on the file = hosts and untick read only
#
#
#
10.10.10.1 sw1-12
save your changes.
then - start/run/cmd
ipconfig /flushdns
ipconfig /registerdns
res
Paul
07-07-2015 05:46 AM
Hi,
It's ok,thanks.
Best regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide