cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
384
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cannot see any logging information from router to syslog server

Hi all,

Hope someone can assist, I'm trying to view the logs from a Cisco 857W router to a workstation running the Kiwi Syslog server.

what I've done is the following:

Config term

Logging on

Logging source-interface BVI1

Logging Facility Local7 (or any other facility you want to allocate for this router.)

Logging [IP Address or Hostname of machine running Kiwi Syslog Server]

End

I see noting on the syslog server.

Although I can see the log information on the router

Also is there a command to stop the logging from generating or is this on by default.

Thanks

1 REPLY 1
Highlighted
Beginner

Cannot see any logging information from router to syslog server

Move information to problem, I entered a show logging and got the results:

#show logging
Syslog logging: enabled (1 messages dropped, 0 messages rate-limited,
                3 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.


    Console logging: level debugging, 1667 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 275 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 1664 messages logged, xml disabled,
                     filtering disabled
    Logging Exception size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled
    Trap logging: level informational, 1468 message lines logged
        Logging to 192.168.2.2  (udp port 514,  audit disabled,
              authentication disabled, encryption disabled, link up),
              7 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled

CreatePlease to create content
Content for Community-Ad