05-14-2010 11:21 PM - edited 03-06-2019 11:06 AM
I have installed a new WS-X6816-GBIC card in slot 13 and i got this message:
%C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 13, power not allowed: The image for the card is not bundled in image.
I tried to reset the module (#hw-module module 13 reset) and i got this message:
% module 13 is operationally off (Linecard image not present)
Can you help with this?
05-15-2010 03:37 AM
Which IOS image are you running and which supervisor ?
Jon
05-15-2010 03:52 AM
Version 12.2(18)SXF8
05-15-2010 03:56 AM
Ahmed
And which supervisor ?
Jon
05-15-2010 03:57 AM
Supervisor Engine 720 (WS-SUP720-BASE)
05-15-2010 04:03 AM
Do you know which DFC card you have on the module ?
Jon
05-15-2010 04:07 AM
WS-X6816-DFC
05-15-2010 04:13 AM
Ahmed
From the release notes -
Note
•WS-X6816-GBIC requires one of these for use with Supervisor Engine 720:
–WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–WS-F6K-DFC3B (adds 1.67 A@42 V)
–WS-F6K-DFC3A (adds 2.57 A@42 V)
•WS-X6816-GBIC requires WS-F6K-DFC for use with Supervisor Engine 2.
•In a 13-slot chassis, WS-X6816-GBIC is supported only in slots 9 through 13 and does not power up in other slots.
Jon
05-15-2010 04:19 AM
The formar one was WS-X6816-GBIC
WS-F6K-DFC3A
This card is not working now, the TAC gave me this card WS-X6816-GBIC
WS-F6K-DFC
and he told me the WS-X6816-DFC can be used as WS-X6816-GBIC with SUP 720 and there are no issues with it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide