I am trying to upgrade my 6509-e boxes from hybrid to native ios.
The doc i have been following is below..
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_32
I have uploaded the new os and set the config-register to 0X0 and saved the config. But when I try to reload the router i get the following error
Reload to the ROM monitor only allowed from console line
unless the configuration register boot bits are non-zero
Router#sh bootvar
BOOT variable = c6msfc2a-ipbase_wan-mz.122-18.SXF8.bin,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102 (will be 0x0 at next reload)
Router#sh run
Building configuration...
Current configuration : 452 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
!
no aaa new-model
ip subnet-zero
!
!
!
!
!
!
!
!
!
redundancy
mode sso
boot system flash c6msfc2a-ipbase_wan-mz.122-18.SXF8.bin
!
!
!
interface Vlan1
ip address 30.0.0.3 255.0.0.0
!
ip classless
!
no ip http server
!
!
!
!
control-plane
!
!
!
dial-peer cor custom
!
!
!
!
line con 0
line vty 0 4
!
no cns aaa enable
end
Router#