Cat65 can not auto-reload

[pt_wang]

My Cat65 can not auto-reboot now. Someone can help me?

rommon 8 > dir bootdisk:

Initializing ATA monitor library...
Directory of bootdisk:

8602    76314468  -rw-     s72033-adventerprisek9-mz.122-33.SXI5.bin
2      33554432  -rw-     sea_console.dat
2050    33554432  -rw-     sea_log.dat
4098    490225    -rw-     debuginfo_20130716-143729-TPE
13260    76335972  -rw-     s72033-adventerprisek9-mz.122-33.SXI6.bin
4128    139899716 -rw-     s72033-ipservicesk9_wan-mz.122-33.SXJ1.bin

rommon 9 > reset

System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

I set BOOT=bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin

rommon 1 > BOOT=bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin
rommon 2 > sync
rommon 3 > sync
rommon 4 > sync
rommon 5 > reset

System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

rommon>

rommon>  comes up  (failed)

I use set command:

rommon 1 > set
PS1=rommon ! >
LOG_PREFIX_VERSION=1
PF_REDUN_CRASH_COUNT=0
SLOTCACHE=
SWITCH_NUMBER=0
CRASHINFO=bootflash:debuginfo_20130716-143729-TPE
boot=
NT_K=0:0:0:0
BSI=0
RANDOM_NUM=7564149
RET_2_RTS=10:00:16 TPE Thu Jul 18 2013
RET_2_RCALTS=1374112294
BOOT=bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin
?=0

Only I boot this Cat65 is keyin boot command

rommon 2 > boot

Initializing ATA monitor library...
string is bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin
Loading image, please wait ...

Initializing ATA monitor library...

Self extracting the image... [OK]
Self decompressing the image : #################################################
################################################################################
###################################################################### [OK]

[InayathUlla Sharieff]

Try this:

Dev

Set

Sync

reset

boot bootdisck:imagefile

dir bootdisk

sync reset

HTH

REgards

Inayath

[pt_wang]

I did try this:

dev

set

sync

reset

boot bootdisk:imagefile    <--------- on this command the cat65 sup720 can boot system, it is entering IOS boot

dir boot <---- it is only enter rommon>, I already boot-up sup720

sync reset <---- same as above

[pt_wang]

rommon>

i keyin reset

the first message is:

System Bootstrap, Version 8.5(4)

Copyright (c) 1994-2009 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

then  rommon> come out

It seem to be at SP

while

rommon 1 > boot bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin
Loading image, please wait ...

Initializing ATA monitor library...

Self extracting the image... [OK]
Self decompressing the image : #################################################
################################################################################
###################################################################### [OK]

it seem to be bootup RP