cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
382
Views
0
Helpful
1
Replies

Cat8540 - DHCP through Transparent bridging

richard.turian
Level 1
Level 1

We bridged two sites but DHCP service doesn`t work when DHCP server is on one site and clients on the other site. I tried ip helper-address but it doesn`t help. Is there any other way to run DHCP service at Transparent bridging?

1 Reply 1

htarra
Level 4
Level 4

commands are as follows:

[no] ip inspect name L2-transparent dhcp-passthrough

p26-24.12(config)#ip inspect ?

L2-transparent Transparent Mode commands

...(existing inspect commands)

This command enables the DHCP passthrough behaviour in the feature. New features like ARP inspection will follow the L2-transparent keyword along with dhcp-passthrough.

http://www.cisco.com/en/US/tech/tk331/tk660/technologies_tech_note09186a0080094471.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco