Hi Everybody.
I have a big problem witch my catalyst, it has the IOS version show below, and I can not finish to configure NAT because the switch does not support the command ip nat pool. I find in the cisco page and it saids that the IOS IP Base support NAT. I hope someone can tell me how to configure the pool of public address. In my case the ip nat iside source list x interface gx/x does not apply because I have 4 public address.
Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXJ1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 22-Jun-11 17:11 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
Switch-IQUIMICA uptime is 40 minutes
Uptime for this control processor is 40 minutes
Time since Switch-IQUIMICA switched to active is 39 minutes
System returned to ROM by power on (SP by power on)
System restarted at 20:12:10 UTC Mon Oct 3 2011
System image file is "sup-bootdisk:s3223-ipbasek9-mz.122-33.SXJ1.bin"
Last reload reason: Unknown reason
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
--More-- compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6504-E (R7000) processor (revision 2.0) with 458752K/65536K bytes of memory.
Processor board ID FOX1524GJUS
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
8 Virtual Ethernet interfaces
57 Gigabit Ethernet interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102 .
