09-21-2012 08:13 AM - edited 03-07-2019 09:01 AM
Could someone tell me if catalyst2960 supports SSH, and how to configures with CLI
version:12.2
Any help will be usefull
Solved! Go to Solution.
09-21-2012 01:24 PM
Good afternoon isaac mora
Yes it supports ssh, you can configure ssh with this commands:
hostname [device name]
username [name] secret [password]
ip domain-name [domain name]
crypto key generate rsa
1024 -->cisco recommended
Line vty 0 4
No transport input
Transport input ssh
Login local
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
09-21-2012 01:24 PM
Good afternoon isaac mora
Yes it supports ssh, you can configure ssh with this commands:
hostname [device name]
username [name] secret [password]
ip domain-name [domain name]
crypto key generate rsa
1024 -->cisco recommended
Line vty 0 4
No transport input
Transport input ssh
Login local
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
04-16-2013 02:14 PM
for SSH feature, the switch's image must be k9
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide