09-21-2012 08:13 AM - edited 03-07-2019 09:01 AM
Could someone tell me if catalyst2960 supports SSH, and how to configures with CLI
version:12.2
Any help will be usefull
Solved! Go to Solution.
09-21-2012 01:24 PM
Good afternoon isaac mora
Yes it supports ssh, you can configure ssh with this commands:
hostname [device name]
username [name] secret [password]
ip domain-name [domain name]
crypto key generate rsa
1024 -->cisco recommended
Line vty 0 4
No transport input
Transport input ssh
Login local
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
09-21-2012 01:24 PM
Good afternoon isaac mora
Yes it supports ssh, you can configure ssh with this commands:
hostname [device name]
username [name] secret [password]
ip domain-name [domain name]
crypto key generate rsa
1024 -->cisco recommended
Line vty 0 4
No transport input
Transport input ssh
Login local
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
04-16-2013 02:14 PM
for SSH feature, the switch's image must be k9
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: