Catalyst 3850-48T-S Incorrect Temperature in Fault Monitor-

[deepkatiyar18]

Hi TEAM,

Device - Catalyst 3850-48T-S

Current IOS- (CAT3K_CAA-UNIVERSALK9-M), Version 03.02.03.SE RELEASE SOFTWARE

Issue- REPORTING INCORRECT TEMPERATURES in Monitoring tool 

Actual Status -

Switch #show environment temperature status
Temperature Value: 39 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 41 Degree Celsius
Red Threshold : 56 Degree Celsius

Kindly look into it and assist us 

[Leo Laohoo]

Current IOS- (CAT3K_CAA-UNIVERSALK9-M), Version 03.02.03.SE RELEASE SOFTWARE

Issue- REPORTING INCORRECT TEMPERATURES in Monitoring tool 

Exactly how important is this issue?  The reason why I'm asking is because the switch/stack is running a very, very old IOS.  03.02.03 SE was released back in 20 September 2013 and the entire 03.02.X train has been deferred by Cisco due to bugs and security vulnerabilities.

My recommendation is to upgrade the switch/stack to a more recent version in the 3.7.X or Denali range.

[sbhadrav@cisco.com]

You are going to need to walk CISCO-ENVMON-MIB for the TEMP/PowerSupply/FAN status of 3750's in stacks. Here are some specific OID's:

1.3.6.1.4.1.9.9.13.1.4.1.2 ciscoEnvMonSupplyState

1.3.6.1.4.1.9.9.13.1.5.1.2 ciscoEnvMonSupplyStatusDescr.