Hello all,
Got a question for 4900m with TwinGigi Converter.
I bought couple TwinGigi Convert thinking to use it on fix module ports (8 * 10G ports on 4900m ten1/1 to 1/8). I follow TwinGigi configuration guide http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/configuration/guide/sw_int.html#wp1077316 however, I am getting Invalid commands on hw-module: Thanks in advanced!!!
Switch(config)#hw-module module 1 ?
logging Logging
Switch(config)#hw-module module 2 ?
logging Logging
power Enable/disable power to module in specified slot
Switch(config)#hw-module module 3 ?
logging Logging
power Enable/disable power to module in specified slot
================
here is show ver and show mod:
Switch#show ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Vers
ion 15.0(2)SG2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 07-Dec-11 20:20 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x12CF5BC8
ROM: 12.2(44r)SG10
Sushi Revision 11, Tatooine Revision 141, Forerunner Revision 1.79
Switch uptime is 6 hours, 14 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500e-ipbasek9-mz.150-2.SG2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
--More--
*May 24 18:07:33.150: %SYS-5-CONFIG_I: Configured from console b e
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C4900M (MPC8548) processor (revision 2) with 1048576K bytes of memory.
Processor board ID JAE161503L0
MPC8548 CPU at 1.33GHz, Cisco Catalyst 4900M
Last reset from PowerUp
1 Virtual Ethernet interface
20 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Switch#show mod
Chassis Type : WS-C4900M
Power consumed by backplane : 0 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 8 4900M 10GE (X2) WS-C4900M JAE161409U8
2 20 10/100/1000BaseT (RJ45) WS-X4920-GB-RJ45 JAE161404RQ
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 5057.a8ab.6200 to 5057.a8ab.6207 1.8 12.2(44r)SG1 15.0(2)SG2 Ok
2 649e.f3b0.f79c to 649e.f3b0.f7af 1.2 Ok
Switch#
==========================
Thanks!
JL
